CF Partition Wall

The Metl-Span III CF Partition wall panel is the most economical choice for partition wall applications. The lightly corrugated profile for added strength on both faces of the panel ensures symmetry from outside of the building to inside, and from room to room. The panel is not recommended for use on exterior walls of low temperature buildings. (see CF Fluted Panel for low temperature applications)

Exterior Profile: Mesa Wave pattern, 1/8" deep.

Interior Profile: Mesa Wave pattern, 1/8" deep.

Core: Foamed-in-place, Blister-Free, Non-CFC polyurethane, Factory Mutual Class 1 approval.

Module Width: 44.5"

Panel Thickness: 2", 2.5", 3", 4", 5 and 6"

Lengths: 8'-0" to 48'-0"

Exterior Face: Stucco embossed G-90 galvanized steel in 26 ga., 24 ga. Type 304 stainless steel in 26 ga. unpainted.

Interior Face: Stucco embossed G-90 galvanized steel in 26 ga., 24 ga. Type 304 stainless steel in 26 ga. unpainted.

Finishes: Full strength fluoropolymer PVF2, siliconized polyester and Polar White 4.0 mil thick PVC plastisol.

Colours: Eight available exterior colours; Polar White, Regal Gray, Aegean Blue, Sandstone, Desert Beige, Sculpture Bronze*, Brick Red* and Forest Green*. Interior colour and coating is USDA compliant Igloo White polyester. *Sculpture Bronze, Brick Red and Forest Green are not recommended for exterior colour on cooler and freezer buildings.

Joint: Offset double tongue and groove. Fastening: Through fastened at the top and bottom of the panel. Wafer head fastener and clip concealed in the side joint at the intermediate attachment points.